0
My Basket Basket

You have no items in your shopping basket.

0116 2741050
Monday - Friday 8am - 5:30pm | Saturday 9am - 1pm

 

Ever Build Lumberjack 650 Adhesive 14kg

Ex. VAT: £49.20 Inc. VAT: £59.04

Availability: In stock

Product Advantages

LUMBERJACK 650 is high specification, trowel applied adhesive, specifically designed for fixing all types of wooden floors directly onto most substrates.

Based on the latest hybrid Polymer technology Lumberjack 650 is totally water and solvent free.

Permanently flexible – compensates for subfloor movement.

Will bond wood directly to all common subfloors, e.g. concrete, wood, metal, ceramic tiled, vinyl, marble, granite and most natural stone floors.

Suitable for use with underfloor heating (due to high flexibility)

Odourless

Excellent gap filling properties for uneven surfaces

Full bed elastic product gives excellent sound deadening/acoustic properties.

Do not use against bitumen or substrates that bleed oil or plasticizers


Technical Spec
Open time: Approx 90mins*

Drying time: Walk on/Sand the floor in approx 24hrs* Complete cure: 36-48 hours

*under climate conditions, 23°C/50% R.H.

Preparation

PRELIMINARY COMPATIBILITY TESTS ARE RECOMMENDED FOR EVERY SURFACE.

Always check moisture level of subfloor

The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants.

Existing floors must be free from all polish/wax.

Clean existing floor tiling with caustic soda; rinse thoroughly and allow to dry. Residues of old adhesive must be removed mechanically as they may affect adhesion.

Application

Lumberjack 650 is applied to the properly prepared substrate directly from the pail and uniformly distributed by notched trowel, This will cover approx 15m²

Sika MB Primer and Sika rapid DPM are fully compatible but they must be allowed to dry for a minimum of 24 hours before adhering to.

Press the wood floor pieces firmly into the adhesive so that the wood floor underside is fully wetted. The pieces can then be joined together using a hammer and an impact block. Many types of wood floors have to be tapped from the top. A distance of 10 - 15 mm from the wall to the wood floor must be observed.

Fresh, uncured adhesive remaining on the wood floor surface must be removed immediately with a clean cloth.

The laying instructions of the wood floor manufacturer as well as standard construction rules must be observed.

Cleaning

Cleaning:  Acetone or ethanol will remove but hardened adhesive can only be removed mechanically.

Storage / Shelf life

12 months from date of production if stored in undamaged, original sealed container

Store in cool, dry conditions between +5 and +25˚C. Ensure good ventilation. Storage outside these parameters will dramatically reduce shelf life. Opened tins must be closed airtight and used up as soon as possible (within 1 month).

Product Advantages

LUMBERJACK 650 is high specification, trowel applied adhesive, specifically designed for fixing all types of wooden floors directly onto most substrates.

Based on the latest hybrid Polymer technology Lumberjack 650 is totally water and solvent free.

Permanently flexible – compensates for subfloor movement.

Will bond wood directly to all common subfloors, e.g. concrete, wood, metal, ceramic tiled, vinyl, marble, granite and most natural stone floors.

Suitable for use with underfloor heating (due to high flexibility)

Odourless

Excellent gap filling properties for uneven surfaces

Full bed elastic product gives excellent sound deadening/acoustic properties.

Do not use against bitumen or substrates that bleed oil or plasticizers


Technical Spec
Open time: Approx 90mins*

Drying time: Walk on/Sand the floor in approx 24hrs* Complete cure: 36-48 hours

*under climate conditions, 23°C/50% R.H.

Preparation

PRELIMINARY COMPATIBILITY TESTS ARE RECOMMENDED FOR EVERY SURFACE.

Always check moisture level of subfloor

The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants.

Existing floors must be free from all polish/wax.

Clean existing floor tiling with caustic soda; rinse thoroughly and allow to dry. Residues of old adhesive must be removed mechanically as they may affect adhesion.

Application

Lumberjack 650 is applied to the properly prepared substrate directly from the pail and uniformly distributed by notched trowel, This will cover approx 15m²

Sika MB Primer and Sika rapid DPM are fully compatible but they must be allowed to dry for a minimum of 24 hours before adhering to.

Press the wood floor pieces firmly into the adhesive so that the wood floor underside is fully wetted. The pieces can then be joined together using a hammer and an impact block. Many types of wood floors have to be tapped from the top. A distance of 10 - 15 mm from the wall to the wood floor must be observed.

Fresh, uncured adhesive remaining on the wood floor surface must be removed immediately with a clean cloth.

The laying instructions of the wood floor manufacturer as well as standard construction rules must be observed.

Cleaning

Cleaning:  Acetone or ethanol will remove but hardened adhesive can only be removed mechanically.

Storage / Shelf life

12 months from date of production if stored in undamaged, original sealed container

Store in cool, dry conditions between +5 and +25˚C. Ensure good ventilation. Storage outside these parameters will dramatically reduce shelf life. Opened tins must be closed airtight and used up as soon as possible (within 1 month).

Additional Information

Additional Information

Show Bona Logo No
Show Uniclic Logo No
Show FSC Logo No
ambience hardwood flooring advert

{message}

{upsell products}