0
My Basket Basket

You have no items in your shopping basket.

0116 2741050
Monday - Friday 8am - 5:30pm | Saturday 9am - 1pm

 

Bona R880 High Grab Adhesive 310ml

Ex. VAT: £4.15 Inc. VAT: £4.98

Availability: In stock

Product Advantages

Bona R880 is a silane based multipurpose adhesive


Extremely quick setting, can be varied by user

Extremely high initial tack

Contains no plasticizers

Soft elastic but high strength

Water and solvent free


Technical Spec
Drying time, until: - Application of load: 6-12 hours* 

*under normal climate conditions, 20°C/60% R.H.

 

Preparation

The substrate must be even, totally dry, clean, free from cracks and physically sound. The surface should also be slightly textured.

 

Application

Apply with cartridge gun

Before using the adhesive the following climatic conditions must be met: • Air temperature: min. 18°C • Floor temperature: min. 15°C (with underfloor heating max. 20 C) • R.H: max. 70 %

The adhesive must, if necessary, be brought to the right temperature.

After opening the cartridge the required amount of adhesive is pressed out and applied to one of the substrates. The other substrate is pressed in during the open time of approx. 10 min.

Depending on initial load, it may be necessary to fix the parts in place until setting has occurred.

To accelerate the bonding process, water can be sprayed on the substrates or the adhesive (0,5 %, for e.g. 1000 g adhesive you need 5 g of water, the water can be mixed into the adhesive, open time can then be reduced to 5 minutes, lay in the substrates immediately). If on the sub floor applied adhesive has a skin, remove adhesive and apply new. If excess adhesive is exuded it should be carefully removed.

After 4 to 8 hours it is possible to apply load or stress, depending on temperature and humidity conditions.


Cleaning

Clean with acetone and ethanol

 

Storage / Shelf life
Shelf life: 12 months
The temperature must not fall below +5°C or exceed +25°C during storage

Store in cool, dry, well ventilated area.

Product Advantages

Bona R880 is a silane based multipurpose adhesive


Extremely quick setting, can be varied by user

Extremely high initial tack

Contains no plasticizers

Soft elastic but high strength

Water and solvent free


Technical Spec
Drying time, until: - Application of load: 6-12 hours* 

*under normal climate conditions, 20°C/60% R.H.

 

Preparation

The substrate must be even, totally dry, clean, free from cracks and physically sound. The surface should also be slightly textured.

 

Application

Apply with cartridge gun

Before using the adhesive the following climatic conditions must be met: • Air temperature: min. 18°C • Floor temperature: min. 15°C (with underfloor heating max. 20 C) • R.H: max. 70 %

The adhesive must, if necessary, be brought to the right temperature.

After opening the cartridge the required amount of adhesive is pressed out and applied to one of the substrates. The other substrate is pressed in during the open time of approx. 10 min.

Depending on initial load, it may be necessary to fix the parts in place until setting has occurred.

To accelerate the bonding process, water can be sprayed on the substrates or the adhesive (0,5 %, for e.g. 1000 g adhesive you need 5 g of water, the water can be mixed into the adhesive, open time can then be reduced to 5 minutes, lay in the substrates immediately). If on the sub floor applied adhesive has a skin, remove adhesive and apply new. If excess adhesive is exuded it should be carefully removed.

After 4 to 8 hours it is possible to apply load or stress, depending on temperature and humidity conditions.


Cleaning

Clean with acetone and ethanol

 

Storage / Shelf life
Shelf life: 12 months
The temperature must not fall below +5°C or exceed +25°C during storage

Store in cool, dry, well ventilated area.

Additional Information

Additional Information

Show Bona Logo No
Show Uniclic Logo No
Show FSC Logo No

{message}

{upsell products}