Premium water resistant PVA adhesive
Used to bond the tongue and groove joints of our bamboo flooring when floating over Silver Bam, Cush n Wood, Heatflow or classic underlays.
Size: 1ltr bottle = 15m² coverage
Product Advantages
WPVA is a premium water resistant PVA adhesive used to bond the tongue and groove joints of our hardwood flooring when floating over underlay
Technical Spec
Open time: Approx 5mins*
Drying time, Maximum bond (at 20°C): 24hrs Application temperature
Preparation
All surfaces to be bonded must be close fitting, degreased, clean, and free from dust and any other contamination.
Application
Assembly should be made as soon as convenient within the open time.
Pressing should be carried out as soon as possible after assembly whilst the adhesive is still wet. It is recommended that a press time of 14 - 20 minutes is used at 20°C. In a heated press at 70°C the minimum press time is reduced to 3-5 minutes. Pressure should be between 0.21 and 0.69 N/mm² (30 to 100 p.s.i.).
Cleaning
Tools, equipment and surplus adhesive can be remover with a damp cloth before the adhesive dries.
Storage / Shelf life
Store in dry shaded conditions between +5 - 20°C
Shelf life: 1 year from date of production in unopened original container
| Specification | |
|---|---|
| Coverage |
15.00m²
|
Premium water resistant PVA adhesive
Used to bond the tongue and groove joints of our bamboo flooring when floating over Silver Bam, Cush n Wood, Heatflow or classic underlays.
Size: 1ltr bottle = 15m² coverage
Product Advantages
WPVA is a premium water resistant PVA adhesive used to bond the tongue and groove joints of our hardwood flooring when floating over underlay
Technical Spec
Open time: Approx 5mins*
Drying time, Maximum bond (at 20°C): 24hrs Application temperature
Preparation
All surfaces to be bonded must be close fitting, degreased, clean, and free from dust and any other contamination.
Application
Assembly should be made as soon as convenient within the open time.
Pressing should be carried out as soon as possible after assembly whilst the adhesive is still wet. It is recommended that a press time of 14 - 20 minutes is used at 20°C. In a heated press at 70°C the minimum press time is reduced to 3-5 minutes. Pressure should be between 0.21 and 0.69 N/mm² (30 to 100 p.s.i.).
Cleaning
Tools, equipment and surplus adhesive can be remover with a damp cloth before the adhesive dries.
Storage / Shelf life
Store in dry shaded conditions between +5 - 20°C
Shelf life: 1 year from date of production in unopened original container
| Specification | |
|---|---|
| Coverage |
15.00m²
|
